Intex Ultra XTR Frame leg bracket

prusaprinters

<p>I needed a bracket to hold some of my pool stuff to the frame and this is what I came up with.<br/> I also have the holder for the valves for the pump and such too.</p> <p>It needs to be printed in PETG, ABS, or ASA (for UV protection)<br/> I tested PLA and it got weak and warped in the sun.</p> <p>It uses a 2" long 1/4" bolt and nut, I recommend a Stainless steel one. If you use stainless steel bolts please use anti seize on the bolts</p> <p>You can also attach a 1.5" PVC pipe to the bracket and it it for the pool nets and etc if you want.</p> <h3>Print instructions</h3><p>No need for rafts or support material.<br/> I would recommend printing it with at least 3 on the perimeter.<br/> and it works with the 0.6mm nozzle as well as 0.35 layer height if you want.</p>