iPad 3 / 4 LCD HDMI Adapter Case

thingiverse

BOM: * iPad 3/4 LCD Panel (https://www.amazon.com/gp/product/B07R4VR9PR or equivalent) * HDMI converter (see above) * Front Bezel * Back Panel * Input Cover (standard or VESA) * Adapter Mount * 31x M2x8mm self-tapping screws * 10x M2x4mm self tapping screws * Optional: * 4x M3 nuts and bolts for VESA mounting * Base * 1x M2x8mm screw for Base attachment For the screws, I had this pack on hand, so sizes are referenced from that: https://www.amazon.com/gp/product/B0825KGRKQ Build steps: 1. Attach Input Cover to Back Panel with 5x M2x8 screws 2. Install main board into Input Cover using 4x M2x8 screws 3. Install ribbon adapter board to Adapter Mount with 2x M2x4 screws 4. Install assembled Adapter Mount with 2x M2x8 screws 5. Install remote with 4x M2x4 screws 6. Fold ribbon cable to fit open area, tape down remote wires so that they stay in channel during assembly, and place a piece of insulating tape on back of screen where the ribbon adapter board will sit. 7. Connect LCD and install with 4x M2x4 screws 8. Install Front Bezel with 20x M2x8 screws Optional: * Use 4x M3 nuts and bolts to attach to a VESA mount. * Use 1x M2x8 screw to attach Base to assembled panel All files except for the Input Cover will print without supports. Input Cover needs a few small supports for the screw tabs. All parts are oriented for printing, and will fit on a Prusa-sized bed. All measurements taken from the LCD and adapter from the Amazon link above. If yours is a different model, you may need to customize to fit your components. Design source is available below. Source files: https://cad.onshape.com/documents/0e02a56c6dde3a1d350231e3/w/853cca7ed11738e99a6400f3/e/3e5cea2f97d12096a876a0f1