iPhone 6/6S Plus Bumper

thingiverse

Hello everyone, We are 3Dex - a UK based 3D filament supplier and commercial 3D printing company. We stock some very high quality filament that is quickly becoming very popular and for good reason! We love 3D printing and in our spare time we like to design new prints. Here is our latest design - iPhone bumpers. We think these bumpers look great and offer some protection to your precious phone. The bumpers are held on via friction which gives enough grip to allow the bumpers to stay attached whilst allowing them to be removed quickly. NOTE: using the scaling feature of your slicer to decide how tight you want the bumpers to be. Keep at 100% scale if you want a loose fit or if you are printing with ABS. Scale to 97-99% for a tighter fit especially if you're printing with PLA. You could scale it down further to fit a regular iPhone 6/6S. We found that the bumpers print best if you orientate the print so that the flat bottom/top sits flat on the build bed. We don't recommend printing the bumpers on their side. We printed out bumpers in our own Blue ABS filament which is available here: http://www.3dexfilament.co.uk/product.php?id=14 We used a layer height of 0.2mm and an infill of 20%, however, it doesn't matter what settings you use as this design will yield good results regardless of the printer settings. Please check out our website for more free downloadable designs and all of your filament needs: http://www.3dexfilament.co.uk We would love to know what you guys think and any designs you might want to see in the future so please comment below. Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: Any Infill: Any Post-Printing Remove from bed and put on your phone! It's that simple!!