Iphone 7 Case Pusheen

prusaprinters

<p>This is a Remix of the iPhone 7 Case by ScottyMakesStuff.<br/> <a href="https://www.thingiverse.com/thing:2438585">https://www.thingiverse.com/thing:2438585</a></p> <p>Read the print setting and the post procesing before you get the files.</p> <p>The Black on the pusheen silhouette is painted with a black marker but you can switch the color that you are using to print if you like.</p> <p>To fit the phone inside the case, i recomend that you put the case over a flat surface, then fit the botton of the phone on the case, and then genlty fit the rest.</p> <h3>Print instructions</h3><p>You have to set the perimeters to 4.<br/> I made it in PLA and it works fine, but will be better if you dont use a material as rigid as the PLA.<br/> Infill: 25%<br/> Support: No</p> <p>Inserting the Pusheen<br/> In order to fit the pusheen inside the case hole, you have to sand a little the interior borders of the hole.</p> <p>You dont have to glue the two parts together, because when you fit the phone on the case, it will keep it in place.</p>