iPhone 7+ (with Silk Case) / Apple Watch Dock

thingiverse

I'm using this just fine with my iPhone X and this (https://smile.amazon.com/gp/product/B0769GL4PN) case as well. I added a version for "Non-Plus" models with a smaller area for the phone. I haven't tested or printed this one but it was requested so I thought I would give it a try. Let me know if you print it - how it works for you. I used Scan Source 3Ds iPhone 6+ / Apple Watch dock (http://www.thingiverse.com/thing:864011) for a long time but I bought a case (https://amazon.com/gp/product/B01JTI24ES/ref=oh_aui_search_detailpage?ie=UTF8&psc=1) and my phone wouldn't fit into that dock. I based this design on that design and several others I have seen on Thingiverse and elsewhere. I'm kind of a noob at modeling so mine routes the cables a little differently, in a way that was easier for me to model. This fits my original apple cables pretty tightly, especially the watch charging puck. I did have to superglue the phones charging cable into the dock though. You might want to print it a little bigger (1%?) if you have trouble with it fitting. But it works pretty well for me. Here is a link to the Fusion 3D design -- this is my first really significant thing I have done in F3D (so this isn't a super clean design). http://a360.co/2jSLybs Print Settings Rafts: No Supports: No Resolution: .2 MM Layer Height Infill: 20% Notes: I printed this at 60MM/Sec in PLA on my Powerspec Ultra printer. I designed it to avoid any need for supports.