iStick Pico Dual Holder v2

prusaprinters

<p>After designing and using my original vape stand for a while (<a href="https://www.thingiverse.com/thing:2450149">https://www.thingiverse.com/thing:2450149</a>) we started to accumulate a number of 60mL and 100mL juice bottles, and a bunch of additional tips and such that my original design didn't accommodate. So, I dove back in and designed a bigger version to hold more/bigger bottles. The bottle slots are all sized for 100mL, but can hold 60mL or 30mL without too much jiggling around.</p> <p>Additionally, I added a drawer at the base of the stand that is deep enough to hold an additional iStick pico, plus some spare batteries, coils, tanks, and tips.</p> <p>The drawer's sides and bottom are all designed at 3mm thickness, which I know is probably way overkill. After using for a while, I may cut those down to provide a little more room in the drawer, and to save on filament.</p> <p>I printed both of these at 100% and the tolerance for the drawer was about perfect. It slides easily without any noticeable left/right wobble, and the front sits flush with the rest of the stand when closed.</p> <p>Need a place to put your picos when driving? Does your car have a cassette deck? <a href="https://www.thingiverse.com/thing:2768508">https://www.thingiverse.com/thing:2768508</a></p> <h3>Print Settings</h3> <p><strong>Printer:</strong></p> <p>Monoprice Maker Select V2</p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div> <p><strong>Supports:</strong></p> <p>No</p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0.3mm</p></div> <p><strong>Infill:</strong></p> <p>15%</p> <p><br/> <p class="detail-setting notes"><strong>Notes: </strong></p> </p><div><p>Could probably look really nice at a higher resolution, but I printed at 0.3mm to save time and it still looks pretty good.</p></div> </p></p> Category: Organization