JD LCD Panel Mount for RRD Smart LCD Controller onto Ord Bot Hadron

thingiverse

This panel mounts RepRap Discount's Smart LCD Controler to the header panel of the Ord Hadron. I used the basic idea of another Ord LCD mount panel (see the remixed from section), but drew a new one with tighter perimeter edges, standoff spacers, added a hole for the contrast adjustment pot, added rounded corners, notches for the cables and support standoffs for the lower edge of LCD panel. Photos should be coming soon. Instructions I used a laser engraver with settings appropriate for the material used. The LCD panel mount can be made of anything, I used 6mm thick acrylic for the mount. The smallest six holes can be drilled to 2.5mm (or #39 drill bit) and tapped the hole to M3 x 0.5 thread. I used 4x M3 x 16 and 2x M3 x 20mm screws. If you don't have an M3 x 0.5mm tap, you can drill the six small holes to 2.8mm or #40, and thread the screws in, the material should form around the screw. The spacers work best if cut from 3mm thick material. They stack 3 per screw on the panel corners, 5 per screw on the lower LCD module.