Jet Engine Component ; Planetary Gear, Modified Parts

cults3d

This is a modified parts set to reduce print time and finishing time after print for the following design. https://cults3d.com/en/3d-model/tool/jet-engine-component-4-planetary-gear Major parts (listed below) are separated to two-parts to eliminated the my special support. A. Affected parts 　(1) Gear10-Carrier01ws → Gear10-Carrier101 and Gear10-Carrier102 　(2) Gear-Box-Rear01ws → Gear-Box-Rear101 and Gear-Box-Rear102ws 　(3) Gear-Ring-Sft01ws → Gear-Ring-Sft101 and Gear-Ring-Sft102 　　New parts are assembled by screws (M1.4x3.5L), and glued if you want. B: Download files includes; 　-files: STL Files (6 items) STL file name: "ws" of last 2 digits means "With Support" which special designed. C: Purchase Parts Information; 　 Additional Screws (M1.4x3.5L) 13ea D. Assembly Points 　- Standard Skill (such as Drilling, Tapping, Filing, Tightening, Painting and Gluing etc.) is needed. E. Total Net Print Time: Approx. 11 Hr (Origina parts=18 Hr) 　- (Estimated as case of PLA, 0.4mm Nozzle, 0.2mm Layer Height, 40% infill and No raft and support) 　Note: When at actual print, each parameter may be adjusted by your experience. F. 3D printing settings 　 Raft, Support, Layer Height, Infill: Depending on your experience. 　 My models were printed by "idbox" using with 0.4 nozzle, 1.75 PLA. I do hope you enjoy making!!