JGMaker Artist-D Adjustable Purge Buckets

cults3d

2021-05-20 Update I modified my Hemera/Matrix mounts and they reduced the gap to the frame and caused a clash with the previous purge buckets. I've added _004 STLs which provide much more space and can be seen in the attached first images too. These should fit stock Artist extruders too. I was sick of the stock purge buckets so tried a couple that existed on Thingiverse which were a great improvement. I decided to redesign them as I wanted to be able to adjust them left and right and more importantly up and down so I could 'tune' how much brush contact there is with the nozzle. I've only tested these with my redesigned extruders but imagine they line up well with the stock extruders (perhaps if you print one then you can let me know if that's not the case). These are mirrored so just print each part normal and mirrored (mirror mode on IDEX or mirror the parts in your slicer). Hardware: - Uses the stock thumb screw - Uses the stock brush - M4 Inserts - M4 Screws (pretty much any size, I used M4x10 Button)