Joystick 3D Printer Control - updated

thingiverse

A replacement set of controls if you have sticky buttons or just prefer a more industrial feel to your 3D printer. NOTE: added a shallow body and a mounting blank Using a small micro-switch joystick + 2 momentary push buttons for select and reset with shroud to prevent accidental pressing + a switch for those of you that have fitted LED lighting and a separate "back box" with a 5 degree angle. The front panel will glue to the surround and the angled face mounts to your printer (choose your angle up or down before glue), all should fit over your existing buttons but you can choose your own fixing method. Instructions I printed in PLA, 100% for the fascia part and 30% for the surround, 0.27mm layers. Part list included as a text file... Control Joystick www.apem.com V4 Screw Mount Joystick - microswitch 44mm wide - 36mm between fixing points 41mm high and 23mm behind 15mm handle dia 20mm cut-out NOte: When fitting lightly bend the two connections that protrude on 3 sides to get a "snug" fit to the back surround. LED Lights Switch SPDT 3A 125vac 3.5mm hole Select Button (Black) unknown supplier 12mm hole - silver/black 2a 250v Large Momentary push to make 2 pin Reset Button (Red) Maplin - FH91Y 50v 1a Large Momentary push to make 2 pin