K8200/3Drag End Stops upgrade
prusaprinters
<p>The end stops for X and Y axis are difficult to adjust as they tend to get loose when unscrewed.</p><p>The original two screw construction is complicated and I made this simpler "one screw" replacement for the axis.<br>There is no need for precise fine tuning of the X and Y end stops - I think this is a sufficient solution.</p><p>The original M4 screws can be reused or be replaced by shorter ones.</p><p><i><strong>>> If you like it, please leave a like, rating or a tip... :)</strong></i></p><h3>Print Settings</h3><ul><li>0.20mm layer height, 15% infill</li><li>2 perimeters, 3 top and 2 bottom layers</li><li>No support or elephant foot compensation needed</li></ul>
With this file you will be able to print K8200/3Drag End Stops upgrade with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on K8200/3Drag End Stops upgrade.