Kang

cults3d

Kang fanart in OBJ format - ready for 3D printing !!! 8) In my opinion, in such a style, the kang turned out to be more terrifying I print on a FDM 3D printer and made a model specifically for printing (taking into account the capabilities of the printer). The model looks better if you use glossy plastics or a metallic effect, I really liked how the PLA silver aluminum print looks (the so-called used filament). Another interesting color I could not find in my sity 8 ( You should not have problems with printing, I checked and corrected everything many times at the modeling stage I used a glass of IVRIG IKEA: https://www.ikea.com/sg/en/p/ivrig-glass-clear-glass-30258324/ https://www.ikea.com/ru/ru/p/ivrig-stakan-prozrachnoe-steklo-50372173/# I hope if you want to print this figure yourself, then you will not have problems finding a glass that is used as part of a space suit I recommend that you print a test piece before printing Kang The glass may differ slightly in size to be sure that the glass will fit exactly - I recommend that you print a test piece (part named IVRIG tester). You can come to the store with the test piece and choose a glass so that you did not forget the name of the glass, I wrote it on the detail I printed teeth separately, difficult to print a model with teeth, it’s very difficult to extract support Speed print of 25 mm / s (the slower the better) In the model, I made gaps for gluing teeth. Everything fits well (I checked the tolerances on 3 different FDM printers) Teeth were printed piece by piece, 1 after another. I do not recommend putting their print at once, it may not turn out well. It took me less than an hour to print 10 teeth