Keg King, Kegerator Fan Mod

cults3d

A replacement fan housing for the Keg King Kegerator. Should improve refridgerative efficiency and reduce the chance of warm spots within the fridge. Utilises the existing 60mm fan, but points the airflow in a useful direction. Also adds 3 hanging points for gas and beer lines. This mod is for the series 3 kegerators from Keg King. It might fit other series and brands, if they use a 60mm fan that is mounted to the inside wall of the fridge. The manufacturer mounted the fan in a manner that does not permit any useful airflow. The fan is intended to move air around the fridge so the temperature is even throughout. This modification repositions the fan so that it blows towards the door of the fridge at a slight angle; it is hoped this will swirl the air around enough to reduce warm spots, especially those furthest from the heat-exchanger at the rear of the fridge. The number of kegs, and other items, in your kegerator will affect the ability of air to circulate. If you can, position contents to enable airflow. I you replace the OEM fan with another, be sure not to use a high current fan; you might over-stress the driver circuit. The OEM fan in my fridge was rated at 12VDC @ 0.10A (or 100mA), yours may vary. Files: 60mmFanMount.2.stl is the basic angled fan mount. 60mmFanMount.3.stl is the angled fan mount with 3 hose holders (the holders have a very positive grip, which might mar some hoses). 60mmFanMount.4.stl as above but should be "kinder" to your hoses and it has a bit more clearance for one of the nuts. Cheers If you like these mods, and you'd like to fuel even more of them, please send beer coupons to: https://www.paypal.me/azza68