Keurig K-Cup Mountable Holder

thingiverse

This K-Cup holder is designed to hold both the reusable/refillable K-Cup as well as single-use pods. The holder has an angle on it to provide clearance for the cycling of the mechanism. This design works on my Keurig Model K50. It should work fine on similar models. The functionality mostly has to do with placement. I intend on modifying this design to accommodate models that are shaped differently. Also, feel free to remix this design to mount on different surfaces. The mounting process is simple. I used indoor mounting tape (as shown in the picture having the green diamond pattern). Any double sided tape should work as long as it has good adhesion. Make sure you can open and close your machine without interference. Below are two links to the products that I used. Link to the refillable pod:https://www.amazon.com/Keurig-5048-Reusable-Coffee-Filter/dp/B000DLB2FI/ref=sr_1_1?s=kitchen&ie=UTF8&qid=1485025767&sr=1-1&keywords=keurig+my+k+cup Link to mounting tape:https://www.amazon.com/Scotch-Indoor-Mounting-Tape-Heavy/dp/B00004Z4A8/ref=sr_1_13?ie=UTF8&qid=1485025971&sr=8-13&keywords=mounting+tape Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2 Rafts: No Supports: No Resolution: 0.2 mm Infill: 20% Notes: I printed this without any rafts or supports and it came out fine. Material: PLA Extruder Temp: 210 C Heated Bed Temp: 55 C I use a glass bed lightly sprayed with Aqua-Net to set a nice initial layer. How I Designed This I measured my refillable pod to get the dimensions for the holder and used Autodesk 123D Design to draw the file.