Keurig K-Duo Plus Coffee Mug Riser

prusaprinters

<p>The K-Duo Plus has plenty of height to fit a tall travel mug. But regular-sized mugs are just too far down there which results in splashing and spattering. Thus this riser.</p> <p>There is a flat indexing tab on the back to make it easier to set it down straight. I've also preserved the "oh no, I forgot to put a mug in place" hole. Lastly, there is a slightly raised platform on the top to remind you to set the cup a bit towards the rear, as the outlet spout for the K-Kup function is set back as well.</p> <p>A 38mm and 55mm high version are both included in the files. Pictured is the 38mm version.</p> <h3>Print instructions</h3><h3>Category: Kitchen &amp; Dining Print Settings</h3> <p><strong>Printer Brand:</strong> Prusa</p> <p><strong>Printer:</strong> <a href="http://amzn.to/2rqZ6Uo">i3 MK3</a></p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> Yes</p> <p><strong>Resolution:</strong> .2</p> <p><strong>Infill:</strong> 10</p> <p><strong>Filament:</strong> Hatchbox PLA Black<br/> <strong>Notes:</strong></p> <p>Only need supports under the tab in the back.</p> <p>I printed with 10% honeycomb infill with top and bottom perimeters set to 0. Then, I added a modifier to enforce 3 perimeters for that last little platform on top. I also used Hilbert Curve top pattern. Not necessary, you can just print with regular perimeters everywhere and normal top pattern, but I think it looks cooler.</p>