KillerBEE v. 1.4 GoPro 3/4 30° Tilt Mount
thingiverse
This is for the "updated" version 1.4 of the KillerBEE. The old mount will work just as well, this is just a more perfect fit, because the front of the topplate now has a curve. Fasten to the top plate of the Birds Eye KillerBEE with 4x M3x8mm screws. Put two M3x10/12mm in the side of the mount, to fasten one or two rubber-bands to go around the GoPro Cam and hold it secure. Print Settings Rafts: Doesn't Matter Supports: Yes Resolution: 0.1 > 0.2mm Infill: 30% or better Notes: Print as it is, with support that goes inside the cutout. You will need 4x M3x8mm to fasten it, to the KillerBEE Top plate and 2 additional M3x10 or M3x12mm to screw into the sides for the rubber-bands, which goes around the Lens of the GoPro 3/4.
With this file you will be able to print KillerBEE v. 1.4 GoPro 3/4 30° Tilt Mount with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on KillerBEE v. 1.4 GoPro 3/4 30° Tilt Mount.