Kodama Trinus Fan Shroud Tool
thingiverse
Fan Shroud Tool to help the hotend hold the temperature while using the part cooling fan. More Information here: http://www.kodamaforums.com/phpBB3/viewtopic.php?f=17&t=1586 Print Settings Printer: Trinus 3D Rafts: No Supports: No Resolution: 0,2 Infill: 25% Notes: I Printed mine in PETG, but I think PLA would also work. Post-Printing Using the Tool You'll need a thin sheet of metal (appx. 0,2mm). I used an empty tube of mayonnaise. Place the metal between the tool. Cut the metal so that you have at least 1cm around the tool Press the Tool together. Either step onto the tool or use a vise Use the bottom part to poke a hole through the metal Deburr and remove unneeded metal around the hole Cut 3 arms that will hold the metal on the stock shroud install Enjoy using the Fan again :) IMPORTANT: The nozzle MUST show through the shroud. If it is too close you will damage your print!
With this file you will be able to print Kodama Trinus Fan Shroud Tool with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Kodama Trinus Fan Shroud Tool.