Koss KSC75 flexible mounts for Oculus Rift S

prusaprinters

<p>This is a slight modification of Blackrat's design where the ball socket and mounts are separated, to allow for semi-flexible printing of the mount/bracket part.</p> <p>Note that you'll have to print the original headphone holder and ball parts: <a href="https://www.thingiverse.com/thing:3646364">https://www.thingiverse.com/thing:3646364</a>.</p> <p>A semi-flexible mount works quite well, fits snugly and is easier on the headband plastic.</p> <p>You'll need to print the ball socket in a rigid material (PLA seems to be fine) and then glue the parts together. I used a little quick drying super glue.</p> <p>I printed the mounts in a semi-flex PLA with 90A Shore rating, though I'm sure it'll work just fine with TPU too. If you're using a less filament, you might need to modify the wrap-around parts to be a little longer for better grip or other similar modification. The cable holder with my filament only barely works, so I may modify it to better encircle the cable.</p> Category: Computer