Kreg Pocket Hole Jig storage case

prusaprinters

<p><strong>Description</strong></p><p>Inspired by EvgenyF's model on <a href="https://www.thingiverse.com/thing:4793825">Thingiverse</a>, this storage case holds all the accessories for your Kreg pocket hole jig. It includes a snap-together hinged lid with an integrated latch. No longer do you have to go hunting for all your individual Kreg accessories when drilling your bi-annual pocket hole!</p><p><strong>Print Settings</strong></p><p>The assembly in the pictures was printed at the following settings:</p><ul><li>Printer: Prusa i3 MK3S+</li><li>Print Settings<ul><li>0.6mm nozzle</li><li>0.3mm layer height (variable layer height will give you smoother hinges)</li><li>2 shells sides</li><li>4 shells top and bottom</li><li>15% infill</li></ul></li><li>Filament: generic blue PLA</li><li>Supports: none</li><li>Brim: none</li></ul><p><strong>Print Instructions</strong></p><ol><li>Orient the lid with the logo facing down into the print bed.</li><li>The smaller the layer height, the smoother the hinges will feel. Using variable layer height in PrusaSlicer will yield nice results.</li><li>The logo requires some decent bridging, so ensure your extruder fan is enabled.</li><li>I printed mine in PLA but PETG might withstand drops better.</li></ol><p><strong>Assembly Instructions</strong></p><ol><li>Gently squeeze the hinges together and work them gently back and forth to wear them in a bit.</li><li><strong>NOTE:</strong> the left &amp; right edges of my lid don't sit perfectly flush when the lid is snapped shut. The actual lid is slightly warped when viewed from the side. I suspect the hinges are putting the large thin lid under tension and warping it slightly, but I'm not sure. It doesn't bother me, but it might bother you.</li><li>Enjoy having all your Kreg accessories neatly stored in one place!</li></ol><p>&nbsp;</p>