Kress 1050 mount for Shapeoko 2 CNC (with vaccum mount)

thingiverse

Attention:on the design sold at myhobby-cnc the endmill will not reach your table in case you have mounted the Makerslide at the uppermost position. I'll post a remix for people to intend to have larger Z- travel soon This is a remix of gillespinault's great Kress 1050 mount. I just modified it to fit the Shapeoko 2 having a much smaller Z- Plate. The only part that differs from the original design is the base. Please be aware that it might need spacers in case you use a more bulky Z- Axis bearing plate than I do (like the original one) or better replace the Z plate. It is anyway not good ;-). Also double check whether the holes of your plate match. Mine is from myhobby-cnc and might differ. The only part that differs from the original design is the base. Please download here to give gillespinault credit: http://www.thingiverse.com/thing:297448 Edit: Updated hole distance as well as cylinder magnet hole on top Edit: Added a version for the original Shapoko- Plate having 50mm mounting hole distance and 80mm wheel distance Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 70% Notes: I printed it in ABS (with skirt). 2mm wall thickness and 70% infill because you want some strength. Printed at 50mm/s. Main part is a loooong print (14 hours) Post-Printing What else do you need 4x DIN 912 M5x12 or 16 8x Nuts M5 (preferably with nylon inlay) 4x DIN 912 M5x45 or 50 4x M5 washers The washers go under the screws that fix the body to the plate. You want to have a stiff connection hers. Secure the nuts in the body with some glue or they will drive you crazy when you want to apply the screws