Kriss Vector Hand Guard and Osprey Suppressor

thingiverse

I was looking for a good hand guard to print for my Krytac Kriss Vector. The only good looking ones were 20+ dollars just for the files, so I made my own. This is meant to fit a Krytac Kriss Vector, i'm not sure about any other brands or models. I also made it to fit a modified version Ctrl Pew's Kriss Vector hand stop(i'll put that file in too). If you want to use a suppressor with this, it needs to be less than or equal to 43mm tall and 36mm wide. If you're not sure or have no way of measuring, I would recommend turning your infill down to almost nothing and stopping the print at about halfway. Then use that half to see if your suppressor fits. I have a Creality Ender 3, and the whole thing was too big to print as one object. So I split it in half and titled each half as "stubby" and "extension". I made small holes in each half, you can use a nail or even a toothpick to join the two halves together. The hand guard is meant to be mounted to the gun with 4 counter sunk m3 bolts. UPDATE: I just finished an Osprey Suppressor that is only meant to fit with this hand guard, I can't say if it will or won't fit any other hand guards or barrel modifications on the Kriss Vector. The suppressor is a 5 part print, each piece is held together mostly by tension. The adapter that connects the gun to the suppressor may need glue to stay in the suppressor. The suppressor is not meant to be on the gun alone, it will most likely break if it isn't supported by the hand guard. Have fun and keep printing :)