KRISS VECTOR Style AAP KIT

cults3d

IMPORTANT: READ LIST OF PARTS AND INSTRUCTIONS BEFORE YOU BUY THIS KIT, IT WILL NOT WORK WITH STOCK AAP - !!!BE AWARE THAT THIS KIT REQUIRE YOU TO MODIFY THE BBU!!! - Printer build plate volume in X or Y must have minimum 270 mm, OR build plate big enough to print longest part at angle ( 270 mm) ,this kit is printed FLAT - Parts are already oriented for printing. - KIT is with TDC Mod files - KIT is without fixed stock, you need to use standard AR ones or Castellan Viper clone List of Parts Needed: - Upper Receiver Connector for AAP01 - Outer barrel extender 18 mm x 85 mm (can be a little wider, but not more than 18,8 mm) or longer if you don’t want to use Silencer (silencer cannot be wider than 35 mm). Screws and bolts in mm standards: - DIN Standards and measurements:linklinklinklink All Screws and Nuts for whole KIT (With angled grip and magwellDIN 7991 - Hexagon socket countersunk head cap screws - M3x12 mm– x6 - M3x14 mm- x7 - M3x18 mm- x6DIN 912 - Hexagon socket Head Cap Screws - M5x10 - x1 (Back piece KIT) (IMPORTANT 10 mm length of the thread needed, to long may damage your fire selector, to short may damage your BBU thread if use to much force, to be sure remove fire selector and check if the tip of the screw is flush with internat wall of the BBU) - M4x30 mm- x1 - M4x35 mm– x2 - M4x37 mm– x2 (not standard length, you will probably need to cut longer ones like i did). - M4x40 mm– x2 DIN 934 - Hexagon Nuts -M4 - x7 - M3 - x17 For TDC MODDIN 913 - Hexagon socket set screws with flat point M4x4 mm TDC Mod For TDC Mod with wheel regulation you need also a standard BIT H2 (25 mm in total length) for M4 socket screw, used in screw drivers, to insert into