KUNGSFORS magnetic knife strip tape mount block

thingiverse

This is a simple print which lets you mount the magnetic knife holder without drilling holes in the wall. Double-sided tape goes between the flat side and the wall, the strip rail is mounted to the block with M4 or M5 screws directly to the plastic. You can use the screws from the original set. The holes are smaller than the thread size. They need to be hot-tapped with M4 or M5 screws. Heat the screw to about 200°C and gently tap the hole once or twice. Let it cool down a little before removing the screw. Mount the block to the rail only after the block has cooled down completely and with a cold screw. For my purposes (3 large knifes, 2 small ones and some extras), 2 blocks on the ends + 1 in the middle were enough. No need to drill extra holes in the rail.