Kyosho Blizzard Dual-540 2gear Gearbox

thingiverse

Kyosho Blizzard Dual-540 2gear Gearbox New and very compact design 1 set of all the parts works for left or right side. Genious right. Im not making instructions for this one, but maybe the old instructions can help. You can find them in this project: https://www.thingiverse.com/thing:5848374 All the long spacers are the same. I just made 4 files to make it easy to move them into the slicer. AxleSpacer1 goes behind the 30t pinion to make sure it is a bit of space behind the gear and the gearbox housing, and ye. Its very tight. This might set your patience on a small test. You can disassemble the frames when assembling this to make it easier. The gears I'm using are hardened steel MOD1 5mm 30t and 11t, so don't think they will ever strip. Gears needed for one side: 1pcs 11t 1pcs 30t Screws needed for one side: - For the housing 8pcs CS M3x10-12mm (very important these are countersunk) - For the AxleOutput 2pcs CS M3x16mm (important these are countersunk) - For the motor 2pcs SH/FH M3x12mm Bearings needed for one side 1pcs 5x10x4 2pcs 5x11x4 Resources: Gears: All are MOD1 5mm and bought from https://www.aliexpress.com/item/1005001858396688.html?spm=a2g0o.order_list.order_list_main.41.7e4b1802uMONL1 If you’re using 3.175mm motor axle you need a 3.175mm to 5mm adapter https://www.aliexpress.com/item/1005003745412191.html?spm=a2g0o.order_list.order_list_main.34.7e4b1802uMONL1