Kyosho Ultima ST RS-9/UMW105 Shock stay

thingiverse

Okay, this is re-designed part. Shock stay is 1mm thicker than original, but it keeps the original suspension geometry. If you are using this with the original Type-R/EVO bulkhead, its completely compatible as the Type-R and EVO doesnt use the lower hole of the shock stay (its installed only using 3 screws). If in doubt, read the manual and you will see that the lower hole is not used. If you are using this with original Racing Sports bulkhead, just use the 3 screw holes. The relocated lower hole and the small groove on the lower part of the shock stay is for my custom reinforced front chassis plate, which is released later. I printed this from carbon reinforced PETG. Much stiffer than original. Turn it upside down in slicer, so you only need supports to the small areas around the upper arm balljoint points. Enjoy and please drop a comment how did it work for you, or if you want any changes to be made! Also check my other parts that i have made to Ultima ST Racing Sports/Type-R/Evolution chassis. Here are the links to my project: https://www.rcuniverse.com/forum/rc-nitro-stadium-trucks-243/11675757-my-ultima-st-gp-type-r-evo-20th-anniversary-project-3d-printed-cf-parts.html https://www.rc10talk.com/viewtopic.php?f=30&t=44634