L-39 Albatros NACA air inlets
prusaprinters
<p>NACA air intakes for the L-39 Albatros in different sizes. There are two different assembly variations. The version shown in picture one is used when the installation to the fuselage is only accessible from the outside. In that case you make the opening in the fuselage covering with using the open printpart as a template. Now you glue the backplate to the open part and after the glue has hardenend you glue both parts into the fuselage opening.</p><p>In case you have access to both sides of the fuselage covering you can use the parts shown in picture two. Make the covering cutout (using the left part). After that you can insert the right part from inside the fuselage, fixate it with screws and 2-component resin.</p><p> </p><p>PETG, layer hight 0,2 mm, infill 20%</p>
With this file you will be able to print L-39 Albatros NACA air inlets with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on L-39 Albatros NACA air inlets.