L96/MB01 flash hider (airsoft)

prusaprinters

<h3>Why</h3> <p>My Well MB01 came with a 26mm CW threaded outer barrel and, while I have already made an adapter to 14mm CCW, I have to admit "native" flash hiders just look better.</p> <p>So here's a flash hider that screws directly into the outer barrel. The threads are not modeled to "line up" the flash hider into a horizontal position, so you may want to use an O-ring as a spacer if yours doesn't line up.</p> <h3>Features</h3> <ul> <li>Pre-modeled threads. The thread pitch isn't perfect, but that does make it fit rather snugly.</li> <li>Fits my MB01, but should also fit the MB08 and other Maruzen clones. Possibly even the MB44 series.</li> </ul> <h3>Instructions</h3> <ul> <li>Print it in PETG with multiple walls and slow speed to get the strongest part.</li> <li>No supports required if printed upside down, but you do need good overhang performance+cooling on your printer.</li> <li>.2mm layer height is fine, but .15 or .10 does look better</li> <li>If it doesn't fit, your printer calibration may be off. Try printing it at 99 or 101% scale if this is the case.</li> </ul> <h3>Open Source</h3> <p>As always the original design file (fusion360) is included, so feel free to improve it (or learn from it)!</p> Category: Sport & Outdoors