Laptop Stand 3D Printable for ~13"

grabcad

Laptop stand in two versions. Light one for ultrabooks and fast printing. Heavy one for beefier laptops.It has an angle of 22° and spans 285mm x 230mm for the light- and 310mm x 230mm for the heavy version.PARTS NEEDED light:6 x threaded inserts M36 x screw M3 x 20mmPARTS NEEDED heavy:6 x threaded inserts M36 x screw M3 x 30mmNOTE: you can also just screw the screws directly into the plastic. However you will need to change the diameter of the holes.PRINT SETTINGS:- 0.28 mm height should be good enough (I went with 0.2mm)- No support required.- I would recommend a brim adhesion, especially for the rods.- PETG recommended.If you don't have a printer, you can print it from https://www.jawstec.com/3d-printing-service/ or another online printer.Credits to Justin Mckee for the laptop