Large DIN Rail Prototyping Stand

prusaprinters

<p>This is a stand when used with some DIN Rails makes a useful electronic<br>prototyping rig. You will be able to move your prototypes easily with it. Feet<br>are also provided to tilt a bit the stand (15 degrees). You will find on<br>Thingiverse many accessories. Search for DIN Rail.</p><p>This version supports 3 Din Rails, while the previous one supports 2 Din<br>Rails.</p><p>M4 nuts and bolts are recommended for assembly. You will need 4 x 8 mm and 2 x<br>16 mm bolts if you are using the feet. Otherwise, 6 x 8 mm will be required.</p><p>You will need to print 2 of each. Minimal support material touching the plate<br>is needed for the rail holders. Print them upright. None is required for the<br>risers. An infill of 20% is recommended.</p><p>This object main web page is: &nbsp;<br>http://www.ctheroux.com/large-din-rail-prototyping-stand/.</p><p>This object was designed using Solid Edge Community Edition.</p><p>You can request the source files on the page listed above.</p>