Leader 120 Runcam Nano/Caddix EOS2 Mount

prusaprinters

<p>This is a simple replacement for the original Leader 120 camera mount meant to fit the Runcam Nano FPV camera.</p> <p>There is very little clearance between the mounting screw and the Runcam Nano circuit board, use caution when installing if you're using screws that may be longer or wider than the stock camera mounting screws provided with the Leader 120.</p> <p>I designed this mount to clamp together around the camera utilizing the tiny screws that fasten the halves of the original camera mount however I was not able to recover them so they are untested. I found that the camera mounts very securely using just the screws to the sides of the frame however. If you test them and they need tweaking please let me know.</p> <p>The OpenSCAD file is included if you'd like to play around with it, I'll try to get an annotated version up at some point.</p> <p>Update: Dfetters pointed out in their remix that this mount works for the Caddix EOS2 as well, I've been able to confirm myself that it does work fairly well and it's a nice upgrade from the Runcam Nano.</p> <h3>Print Settings</h3> <p><strong>Printer:</strong></p> <p>Folgertech i3 2020</p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div> <p><strong>Supports:</strong></p> <p>No</p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>Fine</p></div> <p><strong>Notes:</strong></p> <p>It prints well without support although I do recommend using a fine print setting.</p> <h3>How I Designed This</h3> <p>OpenSCAD</p> </p></p> Category: R/C Vehicles