Leapfrog Creatr Z-hardstop with Raspberry Pi camera mount
thingiverse
On April 29th, 2014, we introduce our initial assemblage for a complete installation. The Z-hardstop is fitted by removing the rear bed's bolts and attaching it flat against the bed before reaffixing with the same bolts. Alternatively, 40 mm bolts can be purchased to use rubber grommets for holding down the Z-hardstop (as shown in photos). Special thanks to zabana for rectifying the Z-hardstop design. Print the following components: Camera Mount Z-saver, Camera Back, Camera Front Mount Right, Camera Link 10mm (2x), and Camera Link 20mm (2x). It's advisable to print these with a skirt due to their small, odd shapes. The Camera Mount Z-saver can be printed either standing or lying down (refer to the photo). Purchase two 10mm x 3mm bolts with locking nuts. Attach the camera links and camera mount using these bolts. Lastly, run a 50mm ribbon cable from the camera to the Raspberry Pi.
With this file you will be able to print Leapfrog Creatr Z-hardstop with Raspberry Pi camera mount with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Leapfrog Creatr Z-hardstop with Raspberry Pi camera mount.