LED Dimmer Case for Dimmer-Main-V7
thingiverse
This is a reduced size housing for the black DC 12-24V 8A Manual LED Dimmer which is available from banggood at the following link: https://www.banggood.com/DC-12-24V-8A-Manual-Adjustable-LED-Dimmer-Switch-Control-For-Single-Color-LED-Strip-p-1033046.html Inside is a small circuit board with the marking Dimmer-Main-V7 and a 1K Pot. After printing the case I tap the 4 corner holes with an M2.5 thread tap and possibly put a couple of turns of thread into the mainboard holes. You will need some M2.5 bolts or machine screws to put the case together and either the 2 mainboard screws from the original housing or a couple of small laptop screws or something. The wires on the Pot are a bit flimsy so I would probably recommend sleeving them with some heatshrink tubing before tucking it all into the box. Updated: 04/01/2018 - Thickenend top plate by 1mm for extra strength as I dropped one and the lug broke off.
With this file you will be able to print LED Dimmer Case for Dimmer-Main-V7 with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on LED Dimmer Case for Dimmer-Main-V7.