LED Logo Clock

thingiverse

I'm quite proud of this project. This is my very first 3D design project from concept to reality. I've included the original VW Logo for print, but also a Logo Blank for remix purposes. The original Fusion 360 Files are included as well if you'd prefer to modify the design in Fusion. Keep in mind that the pictures show a lot of manual modifications that were made to the printed parts. I've edited the designs of each part to include those changes so you don't have to do the same. Included in the pictures are a drawn representation of the electronics. The drawing is accurate except that the logic level converter isn't in there. This was added to the project later after issues arose with the LEDs not working correctly. The logic level converter sits between the microcontroller pins for each LED strip and strips themselves. It also has a low level power in, high level power in, and a ground on each side. I've also included the Arduino Sketch I wrote for the clock. You'll need to download the associated the libraries associated to make it work. The sketch is currently a work in progress. So, watch out for updates intermittently. I'll report in once it's completed.