LED Mount for Hero Me Gen4 Dual 5015 Duct
thingiverse
**Links to Hero Me Gen4 by mediaman** https://www.thingiverse.com/thing:3433619 https://www.thingiverse.com/thing:3182917 This is an update version of my previews LED bar mount for Hero Me gen3 (https://www.thingiverse.com/thing:4254593), specifically for Gen 4 Hero Me. Mediaman, the author of Hero Me Gen4, has designed an LED bar mount for Gen4. Mine is a remix of his original design. Specifically for LED strip up to 45 mm in length, 10~12 mm in width, 1 mm in back strip thickness. My LED strip is 38x12x1 mm, hard aluminium back. PETG, ABS or other high-temp material is recommended for heat resistance in long run. PLA should be working fine, but it might warp in time. <h3>- Lightweight</h3> - Print strait forward with support - Use brim if necessary - A pair of M3 screws and nuts are needed to mount between two fans. <h3>- Standard dual 5015</h3> - Print without support - Stabilize with 2 zip ties - Improved air channel for better cooling
With this file you will be able to print LED Mount for Hero Me Gen4 Dual 5015 Duct with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on LED Mount for Hero Me Gen4 Dual 5015 Duct.