LED Panel Light - The ultimate backlight for video or streaming

thingiverse

The ULTIMATE background light for streaming or video production - by Led9er_ ► Printed on a CR-10s 300mmx300mm using PLA with a 0.2mm layer height. ► This design nu-scaled will fit on a 300mmx300mm print bed or larger. The feet can be placed in the center, or printed separately with the lid. ► Due to the 90 degree overhang in the design, support is a must. Be as light with the support density as possible, as the support under the lip may be difficult to remove. ► Instead of typing out the entire process of making this light, I have made a detailed video of the process on my YouTube Channel. - Watch here ► https://youtu.be/CVYnyEpIFrQ If you have any questions, Let me know and I will do my best to help. PARTS NEEDED - 1x Stream_Light_1.0- FRAME 1x Stream_Light_1.0- LID BLANK 2x Stream_Light_1.0- SMALL FOOT 2x Stream_Light_1.0- TALL FOOT 4x 6mm bolts and nuts 4x 3mm bolts and nuts 4x 3mm screws 2.5M of 12v LED strip lighting 1x Mi-light smart led controller (or equivalent) 1x 12v power supply ► The above list is only a guide. Changing the size of the light frame may effect the bolt placement. Quick tips! ► I have included a drawing of the Aluminum plate used in my design. Instead of drilling out all the holes, use the printed frame as a template and mark out the holes to ensure a correct fit. ► Use any bolt size you like for any of the fixings. The feet have been designed to hold the nuts of 6mm bolts, so changing the size of these bolts may require resizing of the feet to match the new size. ► All holes are slightly undersized and will require drilling out to achieve a tight fit. Using a drill bit 0.5mm smaller than the fixing screw for the lid will ensure a tight fixing of the screw.