LED Power Supply Mount for 2060 Extrusion

thingiverse

This is a LED Power Supply mount for 2060 aluminum extrusion. I designed this part to be used with [OpenBuilds Aluminum Extrusion](https://openbuildspartstore.com/v-slot-20x60-linear-rail/?ref=G7bOMra6rjuOz) I built a workbench out of aluminum extrusion and I needed a mount to hold a power supply for my LED lights. I made this in 2 parts, the small mount bolts to the power supply and rests in the track of the extrusion with a lip. The large mount bolts to the power supply and then also bolts to the aluminum extrusion with 2 x M5 8mm bolts and 2 x tee nuts. On the large mount, I've added an opening for an IEC power inlet and a holder for a 3-way Wago connecter. The Wago connecter is necessary if you plan on using a switch to control the LEDs. I've also added an opening beside the Wago housing for wires to exit into the extrusion track to keep things tidy. The power supply requires 4 x M3 12mm bolts to attach to the mounts. The IEC Inlet require 2 x M3 12mm bolts and 2 x M3 nuts. This was my first time using a Voronoi editor in my designs. My main objective was to create better airflow for the power supply and to give the mount a bit of 'spice'. BOM [LED Power Supply](https://www.amazon.ca/gp/product/B010CVIWBK?ie=UTF8&th=1&linkCode=ll1&tag=modernmakes02-20&linkId=a6e64627875d5230358f8cc17301b289&language=en_CA&ref_=as_li_ss_tl) [IEC Inlet](https://www.amazon.ca/gp/product/B081ZFHRGW?ie=UTF8&psc=1&linkCode=ll1&tag=modernmakes02-20&linkId=1280d0cfe97c613872a5f3e2ea0b675d&language=en_CA&ref_=as_li_ss_tl) [Wago Connectors](https://www.amazon.ca/gp/product/B0959QJQNC?ie=UTF8&psc=1&linkCode=ll1&tag=modernmakes02-20&linkId=4fd27072bdb986096e5d6752d8b76948&language=en_CA&ref_=as_li_ss_tl) [M3 + M5 Bolt Kit](https://openbuildspartstore.com/low-profile-screws-m5-10-pack/?ref=G7bOMra6rjuOz) [M5 Tee Nuts](https://openbuildspartstore.com/drop-in-tee-nuts/?ref=G7bOMra6rjuOz) I printed the parts out of [Easy PC CPE](https://filaments.ca/products/polycarbonate-pc-filament-black-1-75mm). 0.4 nozzle and 0.2 layer height. I used supports only for the small mount. The voronoi pattern came out fine on both parts without. This pairs well with my [Rocker Switch](https://www.thingiverse.com/thing:5399939) and [2020 Rail Clips](https://www.thingiverse.com/thing:5397803)