Lendrum bobbin with sheep head embellishment

thingiverse

This bobbin is designed to be used with the Lendrum spinning wheel, but may work on other wheels as well. The bobbin consist of three parts: two discs and a tube. The two discs are identical, just print the disc STL twice. The parts are screwed together using threads to avoid having to glue them permanently. ### Print Settings - Printer: Prusa i3 MK3 - Layer height: 0.2 mm - Raft: no #### The discs - Support: yes - The discs should be printed with the sheep head embellishment on the print bed - Infill: 20% #### The tube - Support: no - Infill: 100% ### Post-printing 1. The tube itself is mostly hollow, but the two holes for the flyer shaft are designed to be narrower than necessary and must be drilled open using an 6.3 mm drill. After that use a bit of type 600 sand paper to smoothen out the inner surface of the drill hole. 2. If the discs wobble, please make sure that all support material is removed and that the discs are screwed tightly onto the tube. ### Legal & Acknowledgements The sheep head embellishment is based on an icon made by [Freepik](http://www.freepik.com) from [www.flaticon.com](https://www.flaticon.com/) that is licensed under [CC 3.0 BY](http://creativecommons.org/licenses/by/3.0/)