Lens Caps (one part print)
prusaprinters
<p>I needed a lens cap for my Raynox-250 macro lens to go with the rear cover I designed earlier. After some modifications to make it easier to adjust dimensions I've uploaded more cap sizes.</p><p>Print without support. After print, place the cap with button towards a hard surface and push firmly until it snaps loose. Do the same for the other side. There's only a 0.3mm gap in the design so it will probably stick together somewhat. I've printed in 0.15mm PLA and PETG.</p><p>As always, if you find it useful a tiny donation goes a long way to show appreciation. :)</p><p>NOTE: This lens-cap uses the same spring mechanism as GlOwl but is otherwise designed from scratch: <a href="https://www.thingiverse.com/thing:3241700">https://www.thingiverse.com/thing:3241700</a></p>
With this file you will be able to print Lens Caps (one part print) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Lens Caps (one part print).