Leveling Wheel replacement part for Eumig Projectors.
thingiverse
This is a simple replacement part for eumig Super 8 film projectors of the 60th and 70th. Tried this with an "eumig MARK S 712", but should also work with "eumig MARK S 807" and potentially others. Instructions Print this one, then try to slide it on the metal pole. You may have to squeeze a screw driver into the "gap" to temporarily widen the printed part. Later, seal the gap with some glue or acetone-ABS-mixture. Or cut into two halves and glue together. Whichever you find easier. The original part had some rubber like substance in the middle, so I have added some hot glue in the middle hole at the end and also to the other two projector feets as they also required a bit refurbishment.
With this file you will be able to print Leveling Wheel replacement part for Eumig Projectors. with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Leveling Wheel replacement part for Eumig Projectors..