LG G4 Pokedex GO Case

thingiverse

Customized version of http://www.thingiverse.com/thing:1726127 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1726127 Post-Printing Assembly/Print Settings To assemble the GO Case, print the lid and aimer both flat. The case pieces both print upright, and are made to simply snap together! This friction fit joint works well with ABS filament, but may not work as well with PLA. For a firm connection, you can use a hammer on the edges to join the two pieces. You can also add a little glue if you want it to really be super snug. The hinges are a print-in-place model (use ABS filament for the hinge, PLA seems to work poorly for pins in our experience), and can be printed in one piece! The button latch slides down and acts as a lock, to keep the lid securely shut when the case is in your backpack or pocket! Place the Lock Pin, long side down, in the insert in the Case Top, and glue the Button to the protruding piece of the Lock Pin. Once everything is printed, glue some 1/4" x 1/16" magnets into the voids in the case, which will allow it to snap shut when closed. Some super glue in the hole will keep the magnets securely in place. Snap the hinges into the lid and the combined case pieces, and snap the aimer into the case. That's it! Now you're ready to GO! Instructions Using the following options: aimer_w = 15 phone_d = 11 phone_w = 76.5 phone_l = 148 custom_text = Dexter. camera_l = 40 camera_w = 16 camera_y = 10.15 camera_x = 30