libra Zodiac sign stencil / 2 color print

cults3d

3d model of libra zodiac sign < contains 3 files which can be used to create a stencil alone or 2 color 3d printed image For stencil, alone print the file (2-Libra stencil.stl) as it is (do not flip in slicer). it is 0.28 mm in height so feel free to change the Z dimension in your slicer (for rigidity) For 2 color image, print the file (1-libra Infill.stl) first following these instructions: 1-load the file in slicer. 2-flip the model in the slicer so it's facing upside down. 3-set the X and Y position to (0,0) respectively in the slicer to center the model on the bed 4- set the Initial layer height to 0.28mm (very important) 5- print and when done keep the print on the bed (do not remove), heat the bed and nozzle and change the filament to another color next print the file (libra stencil W background.stl) 1- load the file 2- flip the model upside down 3-set X and Y position to 0 and 0 4- set initial layer height to 0.28mm 5- delete the first model (1-libra Infill.stl) if it is still present 6-print the model