Light lamp lamba avize licht

thingiverse

1. Print out the first STL file. 2. Cut the carbon fiber with a bit of extra margin added. 3. Stretch it out and cover up the face using a hot air gun. 4. Repeat this process four times over. 5. Glue them all together using transparent epoxy. 6. Purchase a 300x300 white light-emitting plexiglas sheet. 7. Cut the plexiglas using a nickel cable and a 12-volt adapter. 8. Make sure no light escapes from the carbon fiber by applying painter's tape. 9. Print out the second STL file, ideally with an ABS or HTPLA material. 10. Buy a LED filament lamp that won't get too hot. [Note: The second STL file requires a 300x300 printer or you can use wood as an alternative.]