Light Switch (NFC 25mm Tags)

thingiverse

This is a light switch designed to be used with 25mm NFC tags. The ones I used for this project are white, PVC wafers that are about $0.12 USD each. They measure about 25 mm in diameter. You can find them [here](https://www.amazon.com/dp/B08BYG1GQZ?psc=1&ref=ppx_yo2_dt_b_product_details). **Note**: You will need to make a color change between 2.0 mm and 3.0mm layer height. **Note**: You should print them with the icons facing down. **Note**: When printing, you will need **2 of the "NFC_Protector" files**. I noticed when printing that the nozzle's proximity to the NFC caused it to melt. This will act as a barrier that prevents that from occurring. When the printer pauses at the break you define: - Insert two of the NFC chips into the circular holes. - Remove the "protector" circles from the build plate (if you printed them altogether). - Insert the protector above the NFC chip. This should be flush with the top of the light switch. Let me know if you have any questions or would like to me to add mounting holes, etc.