Lighted Tactile Button

prusaprinters

<p>This is a small momentary button about 26mm square with space for a single addressable LED. All three pieces print in approximately one hour.</p> <p>Print button with flange facing the build plate, I used support and left it in there. Original plan was to embed the light strip in the button but it distributes light just fine this way.</p> <p>Button Body printed upside down no support needed</p> <p>Button base no support needed should fit together with slight friction fit. Glue may still be needed.</p> <p>In my suggested layout you will see two tactile buttons approximately 6x6x5 (lwh) electronically two is not needed but I liked the way they click and these switches are cheap. In the middle is a WS2812 led.</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Anet</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>A8</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>Doesn't Matter</p></div> <p><strong>Resolution:</strong></p> <p>200</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>20</p></div> <p><strong>Filament:</strong> Overture PetG Clear</p> </p></p></p> Category: Electronics