Lighthouse lamp

prusaprinters

<p>I already made a <a href="https://www.prusaprinters.org/prints/84808-meduse-large-lampshade-in-44-minutes">lamp using the principle of a spiral</a>, but this time the lines are straight, they intersect and create a retro image of an old engineering structure.</p><p>To create a lampshade, you need to print two copies of the model and connect with a lamp holder (no glue is required).</p><p>Each item takes about 21 minutes to print at 0.3 layer and standard settings.</p><p>You can print at 100 percent or, if you have a Prusa Mini, scale up to 95 (socket hole made with a margin).</p><p>Shade fits IKEA HEMMA lamp and most other pendants with a socket of about 40 mm. It is not worth using incandescent lamps, install "cold" ones, for example LED ones.</p><figure class="media"><oembed url="https://youtu.be/kKu6Z3hZhms"></oembed></figure><p>The printing time of each part is 21-27 minutes (depending on the scale) with a layer of 0.3, a nozzle of 0.4. No support required.</p><p>For printing, you can use any plastic close in rigidity to PETG, it is also possible to print PLA or ABS, but these are tougher plastics, so the lampshade will be slightly shorter in height.</p>