Lightsaber blade adapter for disney legacy / galaxy's edge / savi's sabers

thingiverse

# Lightsaber blade adapter for disney legacy / galaxy's edge / savi's sabers * NOTE: Not complete yet, check the CHANGELOG below for current status. * This is the start of a blade adapter. It fits into the legacy-style hilts. You insert, press down, turn counter-clockwise (as viewed from the blade POV), and then release upwards to lock it in. The real part uses POGO pins (on the hilt-side) and metal connectors (on the adapter side). There's also a key (rectangle cutout) that gives this adapter the ability to twist the hilt/connector. This is a WIP - it fits the hilt, and the key & pogo holes are accurate. There are no metal connectors yet, and no finalized connection to an actual polycarbonate blade just yet. My plan is to connect this to a typical 1" PC tube + neopixels. # CHANGELOG * 2020-01-04 - First upload. Fits the legacy hilt, can turn & lock it in. Fits the key & pogo pins. No actual metal connections, no real connection to blade/tube yet. Fit is very tight, may have to sand down the outside a bit.