Line tamer

prusaprinters

<h4>Description</h4><p>This is a small footprint cleat that, together with a small diameter cord (1 or 2 mm), can be used to stow your ropes, halyards and other lines. Specially useful in a boat.</p><p>It's the smaller version of a widely spread commercial product from Barton.</p><p>It screws into a wall with a 4 mm (diameter) non-countersunk screw. The length of the cord to use depends on how big and long the rope you want to stow is. In my case I used around 30 to 40 mm of cord. Mileage may vary.</p><h4>Recommended print settings</h4><ul><li>layer height: 0.2 mm</li><li>infill: anything above 15% should do</li><li>perimeters: 3</li><li>supports: yes, build plate only</li></ul><p>I've uploaded a prepared .3mf file with all the settings pre-set, with already configured paint-on supports.</p><p>&nbsp;</p>