Linear Rail Adapter (MGN12H) for Micro Swiss Direct Drive for Ender 5 using CoreXY Belts

prusaprinters

<p>This is a printed adapter to mount the Micro Swiss Direct Drive Extruder for Ender 5 on a MGN12h linear rail carriage that utilizes the CoreXY belt configuration on the Mercury One.1, Voron 2.4r2 and maybe others</p><p>If you are looking for an adapter using the stock X belt config, check here:</p><ul><li>https://www.printables.com/model/284758-linear-rail-adapter-mgn12h-for-micro-swiss-direct-</li></ul><p>The Micro Swiss Direct Drive Extruder for Ender 5 can be used on a Ender 5, Ender 5 Pro or Ender 5 Plus</p><p>Recommended Print Settings:&nbsp;</p><ul><li>Use a stronger material: ABS, ASA, PC, PCCF (no Nylon)</li><li>First layer height 0.25mm</li><li>Layer height: 0.2mm</li><li>Extrusion width: 0.4mm, forced</li><li>Infill percentage: 40%</li><li>Infill type: Adaptive Cubic, grid, gyroid, honeycomb, triangle, or cubic</li><li>Wall count: 4</li><li>Solid top/bottom layers: 5</li><li>Supports: YES (minimal) - Open the .3MF file to see the use of supports</li></ul><p>Screws you will need:</p><ul><li>(4) M3x8 socket head screws to attach the adapter to MGN12H carriage</li><li>(4) M3x10 socket head screws, (4) M3 washers, (4) M3 Nyloc nuts to attach the belts in the belt clips</li><li>(2) M5x10 screws and (2) M5 washers to attach the adapter to the extruder plate ( top holes )</li><li>(1) M5x18 screw, (1) M5 washer and (1) M5 Nyloc nut to attach the adapter to the extruder plate (bottom hole)</li></ul><p>Many thanks to Print2Win for providing the assembly of the MSDD that enabled this adapter to be created</p><p>Step and STL files added&nbsp;</p>