Little Cities - Fire Station

prusaprinters

<p>Little Cities is the start of a new 3D Printable toy series where miniature buildings and vehicles are stored within a purpose designed case until ready for play. Once play begins simply unfold the case and attach the miniature buildings to the outside of the case to create a mini play set. Each case will be themed with mini vehicles to print as well.</p> <p>This one is a Fire Station. Such fun!!!</p> <p>Note - This is not a MMU print. Simply print the parts in the appropriate colours and glue them together.</p> <p>To see how to carry out filament changes mid-print, please refer to the link below.<br/> <a href="https://help.prusa3d.com/en/article/color-change_1687">https://help.prusa3d.com/en/article/color-change_1687</a></p> <p>Press the button on the side of the fire station and watch amazed as the fire engine whooshes out to tackle any impending fires. The wheels and ladder on the fire engine are moveable too.<br/> Once you are done playing, jst detach the buildings and store back in the case.</p> <p>As this is part of a series I will design other themed cities, the bonus being is the cases will interlock, thus creating a bigger playset. The roads will run in sync too.</p> <p>I've designed a Little City - Burger Drive Through which will be shared soon.</p> <p>Please note some of the parts may cause a choking hazard, so these 3D prints are not recommend for children under the age of 6.</p> <p>If you want to stay up to date with this series and or perhaps interested in other projects I am working on, please check out my instagram.</p> <p><a href="https://www.instagram.com/neil3dprints/?hl=en">https://www.instagram.com/neil3dprints/?hl=en</a></p> <p>Happy printing. :-)</p> <h3>Print instructions</h3><p>The file names will specify if supports are needed.<br/> Or if colour changes are required as well as what height.</p> <p>To see how to carry out filament changes mid-print, please refer to the link below.<br/> <a href="https://help.prusa3d.com/en/article/color-change_1687">https://help.prusa3d.com/en/article/color-change_1687</a></p> <p>1.75mm filament is used to attach the two sides of the case together as well as the ladder to the fire engine and the arm mechanism on the fire station.</p> <p>I printed the case at 0.2mm and all other parts at 0.15mm.</p> <p>The wheels do move on the fire truck, just use patience and small movements to try and loosen them from the body.</p> <p>Also, the grass and buildings are not to be glued to the case. They are to remain loose so they can be easily packed away in the case for storage. Also the fire station sign is to remain loose as well, otherwise the case will not fully close.</p> <p>Any problems leave a comment or send a DM and I will be happy to help.</p> <p>Happy printing. :-)</p>