Logi Ergo M575 Tenting Wedge
thingiverse
# Logi Ergo M575 Tenting Wedge A 20º tenting wedge for the Logi Ergo M575 trackball mouse. ## About the Design A 20º tenting angle increases the comfort over using the trackball on a flat surface. The wedge adds minimal height to the lowest side of the trackball. Stabilising nubs are placed at the side of the mouse where they won't come in contact with the hand. There are no obstructions where the hand would meet the mouse. There are indents on the bottom-side of the tenting wedge to leave space for anti-slip bump-ons. ## 3D Printing I recommend 3D printing the stl file at the following settings: Setting | Value :---------------|-----: Filament | PLA Nozzle Diameter | < 0.4 mm Layer Height | < 0.2 mm Infill | 20% < Supports | Off
With this file you will be able to print Logi Ergo M575 Tenting Wedge with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Logi Ergo M575 Tenting Wedge.